Universal thinner (base/acrylic), 1 liter
COUNTRY OF ORIGIN: Italy
Universal thinner from the Italian manufacturer. The mixing ratio is 100% paint to 60% thinner
ADT.44001.
RECOMMENDATIONS FOR APPLICATION
The first layer is recommended to be applied very light and thin.
The distance from the application surface should be 20 cm.
If the paint is applied with the RP spray gun, the air pressure should be set to 3.5-4 bar.
If the paint is applied with the HLVP-LVLP spray gun, the air pressure should be set to 1.8 - 2.2 bar.
Nozzle - 1.2 - 1.3 mm.
This step is optional, but is recommended to eliminate microdefects due to the presence of silicon in the air.
The next step is to apply 2 standard coats with an interval of 5-10 minutes. In this case, the product is applied until the required level of coverage is achieved.
The distance from the surface should be 10-15 cm.
The final layer is spraying over the entire surface. Apply a very light and homogeneous layer when the enamel becomes almost matte (3-4 minutes after application at 20°C), following the rules specified in the technical information section called "Spraying".
