ADI UPP HYDRO 1K Wet-on-Wet Filler (One-Component, 1 L)

In stock
Professional products from the world's leading manufacturers
Regular price 22,56 EUR
Ask company managers for prices for distributors

Product details

  • Type Primers
  • Vendor ADI UPP
  • SKU ADY.1001

TDS files

Wet-on-Wet Primer HYDRO 1K FILLER WET ON WET ADI UPP

COUNTRY OF ORIGIN: Italy

Water-based, one-component acrylic wet-on-wet primer.
The product can be air-dried or dried in a spray booth and used as an isolating primer. It is intended for applications where a high dry film thickness is not required.

MAIN ADVANTAGES

1. Topcoats can be applied over the product just 3 minutes after drying with warm air (using a drying gun), or after 20 minutes at 20°C.
2. Excellent adhesion to metal, aluminium, phosphated sheets, galvanised sheets, fibreglass and ABS plastics.
3. A coating system consisting of this primer, paint (both water-based and solvent-based) and clear coat provides an excellent, full, glossy and smooth finish.
4. Excellent sanding properties in the isolating version.
5. After first use, the product can be tightly sealed in its container to prevent water evaporation.
6. The product can be applied directly over cathodic e-coat, even without prior sanding.
Due to its chemical nature and, in particular, its water-based formulation, the product is non-aggressive. It is therefore highly recommended for automotive body repairs when the chemical nature of the materials previously used to paint the vehicle is unknown. When using this primer, the risk of coating lifting after completion of the repair is minimal.

RECOMMENDATIONS FOR USE:

1. When using the product in the wet-on-wet version, dilute it by 30% using thinner (code ADT.2200).
Spray gun settings: nozzle 1.3–1.4 mm. Adjust the air pressure according to the type of spray gun: 3–4 bar for a conventional spray gun, or 1.8–2.2 bar for an HVLP or LVLP spray gun. Maintain a distance of 15 cm from the surface and apply 2 even coats, allowing 10–15 minutes between coats at 20°C.
We recommend applying the next coat when the surface has become completely matt. After applying the final primer coat, wait 20 minutes at 20°C or 2–3 minutes while blowing warm air over the surface (using a drying gun). You can then apply either water-based or solvent-based paint over the primer.
2. When using the product as an isolating primer, dilute it by 10–15% by volume using thinner (code ADT.2200). Spray gun settings: nozzle 1.5–1.7 mm. Adjust the air pressure according to the type of spray gun: 3–4 bar for a conventional spray gun, or 1.8–2.2 bar for an HVLP or LVLP spray gun. Maintain a distance of at least 15 cm from the surface and apply 2–3 even coats, allowing 10–15 minutes between coats at 20°C.
We recommend applying the next coat when the surface has become completely matt. After drying for 2 hours at 20°C or 30 minutes at 60°C, the primer must be sanded. You can then apply either water-based or solvent-based paint over the primer.
For enhanced corrosion protection, we recommend applying the product over anti-corrosion primers or cathodic e-coat. Use a water-based equipment cleaning solution to clean the equipment.